Unconventional Storage Solution

I know that I have teased you about my craft room and the progress, but today ends some of the teasing. I'm here to show you how the hutch turned out, and the process that it took to get there.

It wasn't as difficult as I thought it was going to be, but that's because of my palm sander and the new paint sprayer. First, the obligatory before pictures, and some background on the hutch itself. The hutch belonged to my grandmother, and she kept it in a storage space just behind the kitchen in her apartment. The bottom held all of her Corningware, and the top was for food storage. It was a two-piece hutch made of solid wood, never finished, and was slightly too large for the space she chose for it.  

When it came time for her to move out of the apartment and into an assisted living facility, the hutch was stored in my parent's garage. It spent two years there, until Dylan and I moved into our second apartment, where we had space for it since my parents were moving to Georgia and weren't going to be taking it with them. At that point, the raw wood had aged a bit from being out in the garage for so long, and it had started turning to a darker color. I had already started disassembling the bottom part of the cabinet, so you'll notice that the hinges are already off, but that just shows you the difference in the color of the wood where it was protected by the hinges and the rest of the hutch that was out and exposed to the elements in the garage.  

The first step in refinishing it was to sand the wood down. I wanted to get the years of dirt off of the piece and by sanding it, I would be able to make sure that the paint would be absorbed into the wood properly, leaving me with a good finish. It took me just about an hour to sand all of the shelves, the doors, and both the inside and outside of the two large pieces. I had decided to paint the inside of the hutch as well, even though the bottom part would have it's doors put back on, painting the inside white was going to help make it brighter and easier to see the contents. Painting the inside of the top  of the hutch white was going to be necessary because I had decided that I wasn't going to put the glass doors back on. They made the hutch look a little too traditional, and I wanted some easily accessible storage space with open shelves, which would work out perfectly without doors.

I began the painting process with two coats of primer, both of which I painted by hand with my favorite brush and mini-roller, and it took me about two hours to do the bottom part of the hutch and all the shelves and doors. I took a break to eat dinner and then painted the top half of the hutch. And I repeated that the next day. And it was so boring, honestly. In fact, I was so bored with it, that I didn't start the actual painting until I was trying out the first paint sprayer I bought. When that one didn't work as expected, I tried out a different paint sprayer, and in all my excitement, I decided to just use it on the entire thing, not just the shelves and doors as originally planned. And it turns out that that was a genius idea, because the hutch only needed one coat of paint with the sprayer, and it was done in less time than it took me to hand prime just the bottom part of the hutch!

Have I mentioned how much I love this paint sprayer? Didn't think so. :)

Anyways, once it was finished, I had Dylan help me bring it back upstairs and into the craft room, where I pushed it into what I am hoping is it's final location in the room. I'm still not quite sure if I like it where it is, but if I need to move it around a little bit, it should be pretty easy to do so. In the meantime, however, I did populate it with some of the items from our wedding, the boxes from my favorite shoes, all of my fat-quarters, my sewing machine, the Cuttlebug, and in the closed part of the hutch are some fabric scraps and batting, and paper products. It probably won't stay that way, since I still have tons of stuff in boxes that needs unpacking, but for now, it's great! It's so funny that a dining room hutch would be the perfect solution to storage for a craft room - just shows how repurposing furniture can end up working out so well!

In terms of the hardware, I didn't change it out, as the holes were already there, and the hinges were in good condition, they just date the piece a little bit. But, instead of keeping them black, I decided to prime them and then spray paint them orange! A little more color in a room for crafting just makes it happier, plus, a little more orange is never a bad thing, especially since it's my favorite color!

The knobs were in good condition too, but they were just a little too small, in my opinion. I took a trip to Hobby Lobby to see if they had anything fun and playful, but I didn't realize how expensive knobs could be! So while I was there, I just went to the wood crafts aisle and grabbed a bag of 4 round knobs for less than it would have cost me for one knob! I put a few coats of high-gloss white paint on them, and then decided to pull out the paint rollers that I used for testing swatches on the interior walls of the house that I had been storing in plastic baggies since the Fall! Since they were stored in air-proof baggies, they still had a lot of paint on them, so I just took out all of the rolls and starting pressing them onto the knobs in different places. And when I had almost all of the white covered and all of the colors of the house, I left them to dry, and then put them up on the doors of the hutch and loved them!

I'm so glad that I have this room started and that I now have some great storage in the space. I'm really looking forward to getting things finished, and checking another room off the list. Just a few more things to hang, some tables to set up, and a chair to find, and then this room will be done until I decide to tackle the serious lack of organization in the closet. 

Have you ever painted a piece of furniture with a spray gun? What about decorated your own furniture knobs?

Birch Trees and a Decal Review

This past weekend was a very busy one. We have been trying to finish up some of the projects we have started over the last few months, but like it seems to happen over here, things get partially finished and then other things get started. I really should be more diligent about finishing one thing before starting the next, as it would make my to-do list much shorter and my stress levels much lower. But, getting back to this post, yesterday, while Dylan wasn’t feeling well, I took it upon myself to get some one-person work done - specifically, installing the vinyl decal in the guest bedroom.

If you remember back to the design plan that I showed you just over a year ago, I had plans to install a vinyl decal on the wall that the bed is going to be against. I had picked out the Birch Tree Vinyl Decal from Innovative Stencils and I finally got around to installing it yesterday. It had been sitting in the closet for just about a month because I had to wait for the best time to install it. That bedroom has no overhead lighting, and we haven’t purchased any lamps for the space yet, so the only light available in the room is from daylight through the windows. Unfortunately, when I get home from work at night, there isn’t enough light to install the decal, so I was lucky to be able to get it done this weekend.

When I finally opened the packaging, I read through the directions that Innovative Stencils included with my decal, and they seemed really straightforward, so I started with their first step.

As suggested, I took the two sheets of decal that I was shipped and began cutting them into separate sections. Since my Birch Tree Vinyl Decal could be installed using any pattern I wanted, I cut each tree into it’s own sheet and then I was able to arrange them against the wall so I could figure out the order that I wanted. Cutting each tree into its own sheet also made it very easy to install onto the wall later, since I could do smaller areas at a time versus one large sheet. 

Once I had the order laid out on the floor next to my wall, I used a few pieces of painter’s tape to hang them on the wall to figure out the perfect spacing. The sheets were very light, so I only ended up needing two small pieces at the top of each tree to hold them onto the wall. Thankfully, the painter’s tape came off easily too, because I did have to change the spacing a few times before I got it to look perfect on the wall.

With the trees in place, the next step was to actually adhere the decal to the wall. Per the instructions from Innovative Stencils, I added a horizontal piece of painter’s tape to each tree to hold it in place so I could work on one half of the stencil at a time. I worked from the top down in adhering the decal to the wall because I wanted to make sure that I had a perfect match at the seam of the wall and the ceiling and the leftovers would be towards the bottom. You may decide to work from the bottom of your stencil towards the top, depending on where most of the detail in the stencil lays. For the Birch Tree Vinyl Decal, most of the detail is at the top of each tree, so that’s the part that I wanted to keep in tact. You should also be aware that since my walls are divided by chair rail, I ordered the 5’ version of this stencil, and it was just a little too long for my space, but I would much rather have extra than not enough, wouldn’t you? Innovative Stencils has many different sizes for their vinyl decals, so make sure you measure your space and select the correct size decal when ordering.

Starting from the top, begin peeling the paper backing off of the backside of the decal. When you get to the point where your horizontal piece of tape is, carefully cut the paper backing away from the rest of the decal. Be sure not to cut the transfer paper or the decal itself.

Using a credit card, or in my case, a rewards card from a store that is going out of business (grrrr), I flattened the decal onto the wall, starting from the horizontal tape and working upwards towards the ceiling, smoothing from the middle to the sides. Be sure to work with small areas at a time, as you don’t want any air bubbles between the decal and the wall. If you do end up with air bubbles, wait until after the decal is completely up on the wall to try to fix them. Use the corner of your application card to move the bubbles towards the edge of the decal, and once they have been squeezed out, they will disappear for good. Don’t try to peel the decal off of the wall to fix the bubbles – you will risk stretching and warping the decal and it likely won’t stick to the wall again, as you will lose adhesive from pulling on it.

When you reach the top of the decal, make sure that you have pressed it up against and into the corner of your surface, be it the ceiling or a piece of molding. Once you have the top part adhered, it will be time to do the bottom.

Take off the horizontal piece of tape that was holding the decal onto the wall, and peel off the paper backing from the bottom of the decal. Repeat the process that you used for adhering the top part of the decal. 

After you have pressed the decals firmly onto your wall space, you are ready to remove the transfer paper. If you ended up with any overhang on the edges, like I did, you’ll want to cut that using something sharp, like a razor blade, a box cutter, or an X-Acto Knife. 

Once you have the edges trimmed, remove those pieces, and then starting from the top of your decal, gently peel back a corner of the transfer paper. Peel the transfer paper across the top, and then work your way down the length of the decal, folding the paper onto itself as you go. Remember to peel slowly and make sure that your decal is staying on the wall as you peel away the transfer paper. If it’s not sticking to the wall, use your application card to press the transfer paper back onto the decal to get the decal to stick better onto the surface of your wall. 

If you have more than one decal or different sections of one decal, repeat this step for the remaining pieces of transfer paper, and then when you are finished, stand back and admire your work.

All in all, the installation of this decal took me less than an hour working by myself. It was pain-free and not agonizing at all. In fact, once I had done a few of the sections of my decal, I had a routine set and I was able to do the second half of the tree application in less time than the first half. Innovative Stencils truly has created a great product, and I’m excited to see what other decals and stencils I could use in my home where walls may be too big for other art prints.

I am so happy to finally have this up on the wall, and Dylan and I are going to start working on putting some additional furniture into the room this week. I can't wait to get this room put together and then be ready to have guests spend the night!

Have you ever used a vinyl decal in your home? Has this post changed your mind about some of the options available?

Please Note: In exchange for a review of their product, I was able to purchase the Birch Tree Vinyl Decal free of charge from Innovative Stencils. All opinions are my own and are completely honest. I would recommend this company to anyone looking for a vinyl decal or stencil. I would like to thank Innovative Stencils for allowing me to review their product.

No More Brushes

A few weeks ago, I bit the bullet and finally ordered a paint sprayer. I had been wanting one for a really long time, and honestly, it would have been great to have one when we were painting all of the doors on the first floor, but I was just not ready to purchase one yet.

I was caught up in reading every review I could possibly find on all of the different types of paint sprayers and all the different brands. And then I thought I had found it, so I ordered it. It's known as The Critter. Bloggers have praised it, Amazon had amazing reviews, and it's price was amazing at only $50! Plus, it was just an attachment for an air compressor, which I already had.

It arrived in two days, via my Amazon Prime subscription, and I immediately brought it downstairs into my basement workspace. Now, this little paint sprayer is quite creative - it uses mason jars as the paint containers, which means you could buy a pack of twelve at the store and have a container for every paint color you need! I filled up the jar with my white paint, thinned a little with water, as the paint manufacturer suggested, and hooked it up to my air compressor. I let the compressor fill and when it was ready, I pulled the trigger to start spraying.

Except, it didn't spray. I fiddled with the height of the nozzle and the opening in the straw, but it still wouldn't spray. I messed with it for an hour before I set it down for the night and gave it a rest. The next day, I started up with it again. I let the air compressor tank fill completely, and again, pulled the trigger. I messed with the nozzle, and finally got a little bit of paint to come out. I messed with the nozzle a bit more to see if I could get more to spray, but at that point, my air compressor ran out of air and needed time to refill.

I spent a total of three hours trying to get this thing to work, and the best point that I got to was being able to spray for about 30 seconds, at which point my air compressor ran out of air. Most of this was the fault of the air compressor, as I guess it wasn't strong enough to power The Critter, but I still didn't like the paint sprayer. When I did get it to spray, it was the smallest line of paint I have ever seen. In fact, you can actually see some of the test sprays on the sheet in the right side of the picture below - they were that small. I was painting the shelves in the hutch that I was refinishing, and I was maybe getting two inches of paint on every line. Overlapping was causing drips and minimal spacing was leaving visible lines when the paint dried, especially since I was using a semi-gloss paint over a flat primer.

It just wasn't working for me. The spray area was too small, and the fact that it didn't work well with my air compressor was enough for me to send it back. I'm sure that with the right equipment, The Critter would work really well, but based on the results that I saw, I believe that this sprayer would be best for detail work and not something large scale, like painting shelves, doors, or furniture.

Back to researching. It didn't take me long to find a different paint sprayer, and although it was more than double the cost of The Critter, I decided to go with the Wagner 518080 Control Spray Max, which is actually a HVLP spray gun that has a built-in air compressor. Like The Critter, it was delivered in two days via Amazon Prime, and when it arrived, I couldn't get it out of the box fast enough. I was so excited to give it a shot. I pieced it together, filled up one of the paint containers with my semi-gloss thinned paint and tested the spray on the plastic protective sheeting I had hanging from the wall in the basement.

And it worked! Amazingly and perfectly! All I had to was adjust the pressure of the spray to make it a little less globby and it was good to go. Painting one side of the shelf took approximately 15 seconds and it looked perfect. There wasn't a single drip, there weren't blotchy areas, the overlap was perfect without being too heavy, and I could even tilt it to the side to get into difficult areas and the paint would still feed through the straw!  Best of all, though, was that it dried without streaks and with a perfect semi-gloss finish, just like I asked it to!

I was in love, instantly, and actually, I still am. I have used this on shelves, doors, and actually full pieces of furniture and it has worked tremendously. And with the exception of it only coming with two containers, I am so happy with this spray gun that I couldn't recommend it more. I'm on the lookout for some additional containers that work with this model, and while I'm sure there are some available to purchase from Wagner, I'm wondering if there are any around-the-house items that may end up working, like perhaps an empty mayonnaise jar? Worth a shot, right?

I can't wait to use this more, and I already have a ton of projects in mind, because not only will this spray gun work for paint, but you can also use it with stains and finishes, which means refinishing the futon frame we have may end up taking way less time than anticipated. And, I can throw away all those brushes, and never have to clean one out again! Not really, but this spray gun will certainly cut back on the amount of brush cleaning I will have to do, which is always welcome.

Do you have a paint sprayer? What brand did you go with? Have you used it with products other than paint? Fill me in!

A Tale of a Bureau

When I was growing up, I remember sharing a bedroom with my younger sister, Emily. At times, it was great, and then again, like all siblings sharing a bedroom, there were times that it was horrible. We argued like all siblings do, but when we got along, things were great. One of the coolest parts of sharing a bedroom was that our beds could be made into bunk beds, giving us so much room for activities (Can you name that movie? Don't worry, they were made to be bunk beds - we didn't have to nail them together!). The other thing that I remember about our bedroom growing up was a bureau, which I have recently learned was a part of the bunk bed set. When we moved when I was in middle school, the bureau moved with us to our new house, and I had it in my bedroom since we each had our own rooms at that point.

When I went to college, the bureau stayed in my old bedroom and I used it to store clothes I only wore during the summer and items I didn't bring to college. When Dylan and I moved in together my senior year, the bureau finally made it's way into our new apartment. It has since traveled with us to every place we have lived since then - Indiana included. And turns out, that's not the only traveling it has done. This bureau was in the house that my mom's side of the family owned in Newport, RI.

The family owned house in Newport was purchased in the late 1800s, and then during the 1920's, was used as a boarding house, run by a close friend of the family. This bedroom set was purchased for one of the bedrooms in the house. Once my grandmother was married in the 1950s, the house was returned to single-family home status, and my grandmother lived there with my grandfather, my uncle, and my mom. The bureau traveled with them when they moved from the house to New Jersey and Washington, D.C., and then back to the same house in Newport again. When my mom married, she took the bedroom set, and that is how I ended up with it.

Now, since the bureau was built sometime around the 1940's, it was scratched up and had a lot of marks on it from it's years of moving. With it being in my possession now, I wanted to refinish it. It was a reddish-brown color, and I wanted it darker, so using my random orbital sander, I took off all of the polyurethane and all the stain, bringing it down to it's beautiful maple hardwood. Because of the detail, I actually used my Dremel to sand some of the more difficult parts of the bureau.

Before staining the bureau, I actually contemplated making a slight modification to it. The detailed rounded pieces along the bottom of the bureau are not exactly the style that I am drawn to, and since they are just decorative pieces that frame out the bottom and hide the legs of the bureau, cutting away some of the wood wouldn't compromise the structure of the bureau. I measured out the squared shape that I wanted and had my Dremel saw ready to cut, but realized that not only was my blade not long enough to go through the wood, but I didn't really want to make it look different after hearing about it's history in the family. Even though it's not my style, I figured that keeping it's original skeleton was important in a piece with so much history.

Therefore, not making the cuts to the bureau led me straight into refinishing it. The raw wood was absolutely beautiful and in great shape, but to help it accept the new stain, I put on a coat of Minwax Pre-Stain Wood Conditioner and let it sit for fifteen minutes. It's funny too, because the color of the wood with the conditioner on it was just slightly lighter than the original color. I wish I had a better before photo, but the one I took was super blurry and I don't have my picture backup drive unpacked yet.

I wiped the excess off and then applied my first coat of Minwax Jacobean stain. You can see that the last coat of poly on the top was so shiny that it was reflecting the drop ceiling grid onto the surface! Aside from that though, this bureau looks absolutely beautiful now!

Two coats of stain, and three coats of polyurethane later, and the bureau was finished! Dylan helped me put it in the guest bedroom this morning, and it's the first piece of furniture in the room! I'm so excited to finally get the house put together, and I'm so excited that this piece of family history has a new place and a new look. I really love the dark tones of the wood and even though Dylan and I just spent hours painting the moulding in this room white, I think I like the way it stands out against the white beadboard and trim.

I just need to find some cool hardware for the drawers and then it's all set. Oh, and it will need a lamp and some books too, just to finish it off.

I've got a few more pieces to refinish, which should take me a about a week each, since I don't have a lot of time after work to get these projects done, and then we'll be at the point where we can actually look like we live in this house!

Have you been refinishing furniture lately? What's your favorite stain color?

Laundry Procrastination

I've never been one to have a laundry routine. I don't do laundry every day, nor every week. I simply go without until I literally can't anymore. Dylan and I have the ability to literally go over two months without needing to do laundry. Does that happen regularly? No, but it did once, actually.

When my parents moved out, they took their washing machine and dryer with them, since the house we bought didn't have any. I made sure to take advantage of still having a washer and dryer before they moved out, and did a few loads of laundry just before their moving day. When they moved out in the beginning of December, though, we kicked ourselves into survival mode. With the purchase of furniture and a new TV on the horizon, we decided that we would try to wait as long as possible before making the big purchase of our first washer and dryer. And I'm happy to say that we made it until February.

On Saturday, February 1, Dylan and I took a little trip to Sears to finally bite the bullet and buy our first major appliances together - our new washer and dryer. Now, what you need to understand is that this wasn't a sporadic purchase. I had spent hours and hours of time researching what we wanted and what we didn't want in our new appliances.

Like the tech geek within me, I clearly wanted the new set from LG that has a smartphone app that tells you when your laundry is done, but the price tag on that was waaaay more than we wanted to spend. In fact, the price tag on just the washing machine was more than we spent for both the washer and the dryer together! Insane!

In terms of actual features though, here's what we were looking for:

1. Top-Load Washing Machine
2. Electric Dryer
3. Spin-only cycle
4. Rinse & spin cycle
5. Timed Dry
6. Wrinkle Free cycle
7. At least 4.2 cu. ft. washer
8. High Efficiency
9. Energy Savings
10. Cold-water friendly

The first thing may come to you as a surprise, but yes, I actually wanted a top-loading washer. I have had nothing but bad experiences with front loaders. Yes, they are typically a lot larger than top-loaders, but the rubber barrel barriers constantly have mildew and mold issues, and I've had water draining issues along with clothing getting stuck in the rubber barriers before. And some of you may never have problems with your front-loaders, but considering that there is a pretty serious class action lawsuit against one of the top manufacturers of this style machine, I knew I didn't want to take any chances with this type of washer. Top-loader it was.

So, after probably over 25 hours of research on sets that matched my criteria, I finally found a set. Surprisingly, they aren't making very many top-load washers with agitators now, as the new high-efficiency models use a different technology. The set we chose, made by LG, was one of those without an agitator. Despite some reviews of other models that clothes weren't getting as clean without an agitator, this set was available at a bunch of different stores, and all of the reviews were great across the board. So we went to our local Sears, got the run down from the sales associate just to make sure we were going to be satisfied, and then made our purchase. And for an extra $10, we were able to have it delivered the next day, on a Sunday, meaning I didn't need to take any time off of work for the delivery, and I could get some laundry done that weekend!

LG Washer and Dryer 1201 Series via Sears

The delivery guys arrived at 8:30am on Sunday, and had the washer and dryer in their spots and hooked up in the basement laundry room within a half hour. Perfect! Because it was below freezing outside, they said to wait two hours until you start your first load, that way the machines could acclimate to the indoor temperature. After that, they were ready to go!

And the first day of laundry was a success, as have been all three following that! I am so pleased with our purchase and now I guess I am a little excited to do laundry. The machines play a little tune whenever you turn them on and off, and the buttons are in a perfect location. The washing machine barrel is deep, and gigantic, which means washing two sets of queen sheets and three weeks of towels at the same time isn't an issue at all. There are so many different cycle options,  including the ones on my must-have list, that I don't know if I will ever even use all of them! 

Washing machine controls

Dryer controls

But, who knows - maybe now that I have some beautiful new appliances, laundry will happen more often!

What was the first big appliance purchase you made for your house? What kind of washer and dryer do you have: top-loader or front-loader?

DIY: Goodbye Brass!

One of the things I have hated the most about this house is all of the brass hardware.  Ironically, there isn't any brass in the kitchen, but it's everywhere else.  All of the door handles on all three floors of the house, the hinges, and even the outdoor light fixtures are brass.  Since we're literally painting the entire house, I figured what's a little paint on the hardware in addition to the paint on the walls. Replacing door hardware for over 15 doors is quite costly, so as a placeholder, I decided to paint the hardware a brushed nickel color, just like I did to the front door hardware.  

Since I was already removing all of the hardware from the downstairs doors to put a fresh coat of white paint on them, I figured this would be the perfect time to refinish the hardware.  

You'll notice in the picture above that the pieces have labels on them.  Some of the doors were cut to fit in the frames, and the hinges were altered too, so I made sure to label the back sides of the hinges as to where they belonged. To distinguish between them, I made sure to mark top and bottoms, as well as frame and door, that way I knew exactly where each piece went and I could match everything back up perfectly later.  Although you can't see them from the pictures, I labeled the insides of the door handles and the inside of the door latches too, that way I had the matching pieces and everything was working after I reassembled everything.  

I'm pretty sure that the hardware hadn't been cleaned or even wiped down in years, so after I had everything taken off, I gave all the hinges, door pins, and door plates a much need bath to get all of the grease and paint off them.  I ended up needing a razor blade to remove some of the paint, but I wasn't too worried about scratching the metal since I would be sanding them down before painting them.  

I let them sit to dry for a while so I could make sure that there wasn't any water left in the hinge tracks. If you are pressed for time, you could tightly roll a sheet of paper towel and slide it inside to dry it out, but if you just leave them out to dry, evaporation will do the work for you!

I used medium-grit sandpaper to roughen up the surfaces. You will likely only need to sand one side and the hinge tracks, since the back side of your hinges will be flush against either your door or your frame. Don't forget to wipe down your pieces one last time before applying your spray paint, as you don't want any sandpaper particles or dust on the surface.  Lay out your pieces in a well-vented area and begin spraying.  

Don't expect to get great coverage on the first spray. You'll need multiple coats to get an even coverage, but allow for some time between coats before applying the next.  

You'll also want to flip over your pieces after the first side has dried to apply some additional coats to the backside. While you don't necessarily need to cover the part that you don't need painted, I decided to put a strip of painter's tape over the back of my hinges since I had my labels on there and didn't want to accidentally paint over them.  

Painting your door handles is almost exactly the same as the door hinges.  You'll want to roughen up the surface with some sandpaper and then apply a bunch of different coats of spray paint. You may need to flip your handles onto the sides or even hold them at different angles when painting them, depending on the shape and size, and where you need coverage.  You can also tell in one of the pictures below that I was able to get creative and used the side of a cardboard box to prop one side of the door handles up so they could dry without putting a mark in the spray paint.

The biggest difference in painting your handles versus painting the hinges and door plates is that the handles have moving mechanisms.  To make sure that you don't paint your handles stuck, make sure to twist the knob or pull down the levers before you apply each coat of spray paint. If your door hardware has a locking mechanism, also make sure to twist the locking mechanism to make sure that doesn't get painted closed or open.  And lastly, if you are painting the door latch (the part that keeps the door closed in the frame), don't forget to push down on that a few times before each coat too. After all, the point of having a door latch is so that it keeps the door closed, so if it can't be pushed in, it's kind of counter intuitive.   

Give your pieces at least 24 hours to dry after you have applied your last coat, and then you can attach everything back together.  This was the most exciting part for me. After having had our doors off the hinges for almost two weeks, we finally put them back up, and not only did they have a beautiful coat of new white paint on them, but then they also got this hardware makeover!

Once your hardware is attached, you can choose to go back and dab some spray paint on the screw heads and the door pins, since painting them before will just get them scratched up during installation.  This solution isn't perfect, as you can tell in some spots, but I don't think that many people will notice unless I specifically tell them to look at the door hardware. This is really only a temporary fix, too. Down the line, we will replace the door hardware altogether, but for right now, we want our money to be spent on some other things, and this quick $5 fix is a perfect way to hide that brass and make this house look just a little more modern and contemporary!

The only brass left is on the outdoor light fixtures! So exciting! Have you spray painted your hardware? 

How $45 Has Saved Me At Least 10 Hours

One piece of background information is needed for this post - I am a Google Chrome user. I'm sure most of you can understand the use of this browser, but if you haven't already made the switch from Firefox or (gasp!) Internet Explorer, please do for these reasons: safety, ability to share bookmarks across devices, integration with Google Accounts (Gmail, Calendar, Drive, Blogger, Analytics, AdSense, etc.), it's extensions (Pinterest, AnyDo, Evernote, etc.), and most importantly, it's tab-enabled. Now, what goes along with this post is the part about tabs - I am a tab hoarder.

Don't believe me? Well, I don't need to explain anything using words. I'll just show you a screenshot of my current browser.

I won't make you count, but as you can see, there are a lot of tabs open - 52 to be exact, but that's just on this one browser window, on this computer. I use almost all of these on a daily basis, and the others that I don't visit as frequently are there as a reminder that I need to check something.

Now, you're probably asking, "What does this have to do with this post?" Well, one of the tabs that I have open is above is the Sears webpage. I refresh the page every morning to check what's been put on sale. One day a few weeks ago, I finally had hit the jackpot. The DeWalt Random Orbital Sander that I had been eyeing was marked down to just $45! I decided to save on shipping so I stopped by the store after work with the intention of purchasing it. Turns out, though, that the price was only valid for online purchases, and the in-store price was $60 - not outrageous, but still more than I wanted to spend. Bummer, right?!

I was disappointed, but then I figured out a secret! I decided to just bring up the Sears website on my phone, order the sander, and set the delivery option to In-Store Pickup! Since I was already at the store, I just had to walk over to the Merchandise Pickup Window, and grab the sander. And I did just that.

I was able to get the sander for the online-only price of $45 and had it within 5 minutes at the pickup window. So, there's a tip for when you are in store. Always check the online price before making your purchase, because that nifty little "In-Store Pickup" option can help you save a lot of money!

Now, as the title of this post suggests, this sander has saved me hours and hours of time. How?

Sanding doors.

About two weeks ago, we removed all of the interior doors on the first floor to paint them. In addition to that, I also removed all of the hardware and gave it a good bath in some soapy water. They really needed some TLC, but that's for another post.

I wiped the doors down to get some of the grease and buildup off of them, and then sanded them down using my brand new random orbital sander! So, for a total of 10 doors (so far!), I was able to save myself at least 10 hours of sanding, since each door took me about 15 minutes with the sander rather than over an hour by hand.

Please ignore the gross painting/cleaning/tool-using clothes again. It's also necessary to dress in layers for working in the basement. 

Best investment ever. Seriously. I haven't even tackled the doors on the second floor yet, not to mention all of the furniture that I will be refinishing, so this is easily the best $45 I have spent so far in my home renovating and DIY-ing. And for the amount of doors I was sanding, I probably would have gone through that amount of money in sandpaper had I been sanding by hand!

We just put the last coat of paint on the doors and today is the end of the 24-hour curing process I like to let them sit through, so we will be putting them back on the frames tonight after work. I'm so excited to have doors back - the cats are messing with things in closets and it's just awkward because we can't have guests over when there's no bathroom door!

Have you purchased a tool using Sears' In-Store Pickup option? Were you able to catch a break in the price, making the purchase that much more justified?


Please Note: I was not compensated for writing this post. I was not contacted by Google Chrome or Sears to provide this information and review. All opinions are my own.